MIGE2210 Series Gigabit Din-rail Switch
- 7 -
3.4. MIGE2210-2GF-4F Appearance
The front panel of the MIGE2210-2GF-4F integrates two 1000Base-FX
optical ports, four 100Base-FX optical ports, and four 10Base-T/100Base-TX
adaptive electrical ports. See Figure 3-3 below.
Figure 3-2 Front panel of the MIGE2210-2GF
3.5. LED Indicator Light
The LED indicators on the front panel of the MIGE2210 Series Industrial
Ethernet Switches show the status of the system operation and ports, making it
easy to detect and resolve faults. The specific meaning is shown in the table
3-1 LED indicator status list.
Table 3-1 LED indicator status list
RUN
Flicker
The system is running normally
On/ off
The system is not working properly.
PWR1/PWR2
(Red light)
On
Power connection
Off
Power is not connected
Gigabit RJ45 port status LED
10M/100M/100M
(Yellow light)
On
1000M/10M working status
Off
100M working status
LINK/ACT (Green
light)
On
The port has established an active
network connection
Flicker
Port has network activity
Off
The port does not have a valid network
connection
100M RJ45 port status LED
10M/100M
(Yellow light)
On
100M working status
Off
100M working status
LINK/ACT (Green
light)
On
The port has established an active
network connection
Flicker
Port has network activity
Off
The port does not have a valid network
