36
CHAPTER 4: ADJUSTMENTS
ADJUSTING THE fRoNT
BRAKE
The front brake is of the disc type
with mechanical control for which
requires periodic adjustment inter-
ventions.
The clearance on the front brake
lever should be 5 to 6 mm.
The adjustment must be performed
as follows:
- In the driving position to verify the
clearance
- if the stroke was superior turn
register
A
on the brake lever
Attention
: After each adjustment,
tighten the locknut.
for the adjustment of the tension of
the brake cable to act on the bolt
B
so that operating the lever on the
handlebar braking is immediate,
and that the wheel rotates freely
when the lever is not operated.
B
A