04
2 Getting Started
2.1 Inserting the Memory Card
Insert the memory card with the gold contacts facing the
back of the camcorder. Push the memory card until it clicks
into place.
To remove the memory card
Push to eject the memory card out of the slot.
Note:
1. Do not remove or insert the memory card when the camcorder
is turned on. This may damage the memory card.
2. It is recommended to use a 32GB, Class 10 or above micro SD
card.
3. Please format the micro SD card prior to the initial use.
4. If the screen shows “Low Speed Card” while recording, it
means the writing speed of the memory card is too slow. Please
replace it with a higher-speed memory card.
5. If “Card is too fragmented” is displayed while recording, it
means the card is unable to save the recording. Please make a
copy of existing files in the card and then reformat it with this
camcorder.
2.2 Installing in Vehicles
2.2.1 Mount to windshield
1. Attach the bracket to the camcorder.
Slide it into the bracket holder until you
hear a click.
2. Before installing the bracket,
please use alcohol to clean the
windshield and suction cup of the
bracket. Wait for dry and press
suction-cup on the windshield
3. Hold the base firmly on the
windshield and press down the
clamp to mount the car holder to
the windshield. Make sure the
base is securely locked in place.
05
