GUARANTEE AND CERTIF
The information is given to you as you could read it and in no case the dealer has to be considered responsible for any kind
This includes, without restrictions, damages that you can even only hypothetically refer to the use of this given instructions, such as: loss of
goods, profits and incomes; loss of biological value; restoration and replacement cost or other similar costs; or any other s
consequential damage. This information has been written very carefully. We tried to be well
knowledge, best technologies and best abilities. However its accuracy and its reliability are in no wise and in no case due t
authorization to make use of this information is strictly reserved for personal use. Every part of the appliance has been tes
producer functionally before the delivery and consignment date. Therefore the maker's guarantee does not i
an incorrect transportation of the appliance. Besides the guarantee does not include damages to the electric and electronic p
from an incorrect connection to the electric line. The guarantee includes the necessa
a funcional way the appliance by reason of the breakdowns that might occur during the following 24 months after the testing.
guarantee duty is done at the maker's company and does not include refund
damages suffered during the manufacture.
The repairs will only have to be done by authorized staff. Not complying with this
clause will cause the annulment of the guarantee. REFERENCE SET OF RULES:
requisitions of Electromagnetic and Safety Consistency provided by the Regulations:
changes (Regulation 92/31/CEE of April 28 1992 and Regulation 93/68/CEE of July 22 1993); 7
subsequent changes (Regulation 93/68/CEE of July 22 1993);
following Harmonized Rules:
CEI EN61000-3-2 (1998) + A14 (2000) ref. Harmonic Current Emissio
Fluctuations; EN55014-1 ref. Conducted Radiodisturbance Emissions; EN55014
Mhz) & Immunity Tests EN55014-2 ref. ESD, CM, FSB, S, VDSI + E EN60335
main requisitions is attested by means of the affixing of the marking CE¹ on the product. The marking CE¹ was introduced
in 1995.
We attract your attention on the following actions that may compromise the compliance as well as, obviou
product: Incorrect electric power - Incorrect installation or incorrect or improper or in any case different use as to the directions written on
the user's manual given with the product - Change of parts or of original accessories
by non-authorized staff!
WARNING:
DECLARATION OF CONFORMITY according to the attachment II, A of DPR 459/96
THE PRODUCER
IT01555980133
DISTRIBUTED IN THE UK BY
M a i n o U K
D o v e r s O r c h a r d Fa r m , H o o L a n e , C h ip p i n g C a m p d e n , G lo s . G L 5 5 6 A Z
VAT G B 2 7 5 2 9 4 5 3 1
w w w. m a i n o . c o . u k
THE APPLIANCE
HEATING LAMP FOR ANIMALS'
MODEL
CALDO BELLO CB1 OR CB2 OR CB3 OR CB4
MATRICULATION NUMBER
From 4512
IS PROJECTED AND REALIZED IN COMPLIANCE WITH THE MAIN REQUISITES OF SAFETY AND HEALTH OF THE D.P.R. 459/
of July 21 1996 - ATTACHMENT I
The adhesive plate with the mark CE¹ sticked
information of the Appliance Directives.
The following Harmonized Rules has been used to implement in a correct way the main requisites of Safety
and Health of the ATTACHMENT I:
CEI EN61000
3-3 ref. Voltage Fluctuations; EN55014-1 ref. Conducted Radiodisturbance Emissions; EN55014
ref. Power Disturbace (30/300 Mhz) & Immunity Tests EN55014
71. - Oltrona di San Mamette il: 01/07/2003
The declarant:
----------------------------------------------------------
Disposal of old special Equipment
European countries with separate collection programs)
The symbol, found on your product or on its packaging, indicates that this product should not
be treated as household waste when you wish to dispose
over to an applicable collection point for the recycling. By ensuring this product is disposed of
correctly, you will help prevent potential negative consequences to the environment and
human health, which could otherwis
recycling of materials will help to conservate natural resources. For more detailed information
about the recycling of this product, please contact your local city office, household waste
GUARANTEE AND CERTIFICATE OF CONFORMITY
The information is given to you as you could read it and in no case the dealer has to be considered responsible for any kind
that you can even only hypothetically refer to the use of this given instructions, such as: loss of
goods, profits and incomes; loss of biological value; restoration and replacement cost or other similar costs; or any other s
l damage. This information has been written very carefully. We tried to be well-trained in drawing it up according to our best
knowledge, best technologies and best abilities. However its accuracy and its reliability are in no wise and in no case due t
authorization to make use of this information is strictly reserved for personal use. Every part of the appliance has been tes
producer functionally before the delivery and consignment date. Therefore the maker's guarantee does not include damages resulting from
an incorrect transportation of the appliance. Besides the guarantee does not include damages to the electric and electronic p
from an incorrect connection to the electric line. The guarantee includes the necessary spare parts and manpower to bring back into use in
a funcional way the appliance by reason of the breakdowns that might occur during the following 24 months after the testing.
guarantee duty is done at the maker's company and does not include refunds, caused by the catch of the appliance, or refunds of the
The repairs will only have to be done by authorized staff. Not complying with this
clause will cause the annulment of the guarantee. REFERENCE SET OF RULES: This product complies with the main
requisitions of Electromagnetic and Safety Consistency provided by the Regulations:
89/33/CEE of May 3 1989 with subsequent
changes (Regulation 92/31/CEE of April 28 1992 and Regulation 93/68/CEE of July 22 1993); 73/23/CEE of February 19 1973 with
subsequent changes (Regulation 93/68/CEE of July 22 1993);
since it has been projected in compliance with the directions of the
2 (1998) + A14 (2000) ref. Harmonic Current Emissions; EN61000
1 ref. Conducted Radiodisturbance Emissions; EN55014-1 ref. Click; EN55014-1 ref. Power Disturbace (30/300
2 ref. ESD, CM, FSB, S, VDSI + E EN60335-2-71.
The complianc
main requisitions is attested by means of the affixing of the marking CE¹ on the product. The marking CE¹ was introduced
We attract your attention on the following actions that may compromise the compliance as well as, obviou
Incorrect installation or incorrect or improper or in any case different use as to the directions written on
Change of parts or of original accessories with others not approved by the maker, or changed
THIS EQUIPMENT MUST BE EARTHED
DECLARATION OF CONFORMITY according to the attachment II, A of DPR 459/96
IT01555980133
D o v e r s O r c h a r d Fa r m , H o o L a n e , C h ip p i n g C a m p d e n , G lo s . G L 5 5 6 A Z
V AT G B 2 7 5 2 9 4 5 3 1 - S a le s : + 4 4 ( 0 ) 1 3 8 6 8 4 1 1 0 9
w w w. m a in o . c o. u k – s u p p o r t @ m a i n o . c o . u k
DECLARES THAT
HEATING LAMP FOR ANIMALS'
CALDO BELLO CB1 OR CB2 OR CB3 OR CB4
From 4512 – 07 - 2003 and so on, until new issue
IS PROJECTED AND REALIZED IN COMPLIANCE WITH THE MAIN REQUISITES OF SAFETY AND HEALTH OF THE D.P.R. 459/
The adhesive plate with the mark CE¹ sticked on the appliance is integrant part of it; on the plate there is the specific
The following Harmonized Rules has been used to implement in a correct way the main requisites of Safety
EI EN61000-3-2 (1998) + A14 (2000) ref. Harmonic Current Emissions; EN61000
1 ref. Conducted Radiodisturbance Emissions; EN55014
ref. Power Disturbace (30/300 Mhz) & Immunity Tests EN55014-2 ref. ESD , CM , FSB , S, VDSI + E EN60335
----------------------------------------------------------
Disposal of old special Equipment (Applicable throughout the European Union and other
European countries with separate collection programs)
The symbol, found on your product or on its packaging, indicates that this product should not
be treated as household waste when you wish to dispose of it. Instead, it should be handed
over to an applicable collection point for the recycling. By ensuring this product is disposed of
correctly, you will help prevent potential negative consequences to the environment and
human health, which could otherwise be caused by inappropriate disposal of this product. The
recycling of materials will help to conservate natural resources. For more detailed information
about the recycling of this product, please contact your local city office, household waste
The information is given to you as you could read it and in no case the dealer has to be considered responsible for any kind of damages.
that you can even only hypothetically refer to the use of this given instructions, such as: loss of
goods, profits and incomes; loss of biological value; restoration and replacement cost or other similar costs; or any other special, casual or
trained in drawing it up according to our best
knowledge, best technologies and best abilities. However its accuracy and its reliability are in no wise and in no case due to the dealer. The
authorization to make use of this information is strictly reserved for personal use. Every part of the appliance has been tested by the
nclude damages resulting from
an incorrect transportation of the appliance. Besides the guarantee does not include damages to the electric and electronic plants resulting
ry spare parts and manpower to bring back into use in
a funcional way the appliance by reason of the breakdowns that might occur during the following 24 months after the testing. The
s, caused by the catch of the appliance, or refunds of the
The repairs will only have to be done by authorized staff. Not complying with this
This product complies with the main
89/33/CEE of May 3 1989 with subsequent
3/23/CEE of February 19 1973 with
since it has been projected in compliance with the directions of the
ns; EN61000-3-3 ref. Voltage
1 ref. Power Disturbace (30/300
The compliance with the above-said
main requisitions is attested by means of the affixing of the marking CE¹ on the product. The marking CE¹ was introduced
We attract your attention on the following actions that may compromise the compliance as well as, obviously, the features of the
Incorrect installation or incorrect or improper or in any case different use as to the directions written on
with others not approved by the maker, or changed
DECLARATION OF CONFORMITY according to the attachment II, A of DPR 459/96
D ov e r s O r c h a r d Fa r m , H o o L a n e , C h ip p i n g C a m p d e n , G lo s . G L 5 5 6A Z
IS PROJECTED AND REALIZED IN COMPLIANCE WITH THE MAIN REQUISITES OF SAFETY AND HEALTH OF THE D.P.R. 459/
on the appliance is integrant part of it; on the plate there is the specific
The following Harmonized Rules has been used to implement in a correct way the main requisites of Safety
2 (1998) + A14 (2000) ref. Harmonic Current Emissions; EN61000-
1 ref. Conducted Radiodisturbance Emissions; EN55014-1 ref. Click; EN55014-1
f. ESD , CM , FSB , S, VDSI + E EN60335-2-
¹ =
(Applicable throughout the European Union and other
The symbol, found on your product or on its packaging, indicates that this product should not
of it. Instead, it should be handed
over to an applicable collection point for the recycling. By ensuring this product is disposed of
correctly, you will help prevent potential negative consequences to the environment and
e be caused by inappropriate disposal of this product. The
recycling of materials will help to conservate natural resources. For more detailed information
about the recycling of this product, please contact your local city office, household waste
