版本：
V2.0
（
2018.09
）
第
4
页
Accessory
HDMI cable ×1
2pin power line×2
2pin CVBS cable×1
Installation and wiring
Take Muti-rotor UAV for an example:
Carrier connection example
：
Fix the transmitter on the suitable Station
of drone(by 3M strap), and then
install antenna with vertical down.
Next,
camera and transmitter connect with HDMI
cable (or with CVBS cable),and then
connect to power.
Attention
：
Please ensure to install the transmitter
antenna and fasten it before POWER ON.
Otherwise, it will damage the transmitter.
Installation example
