Version
：
V1.0
（
2022.10
）
Copyright © 2022 Mainlink All Rights Reserved
26
【
7
】
Clear window button: to clear the information display.
【
8
】
Select frequency
：
The MK22 frequency band has been set. User cann
’
t change. You can
click
‘
Get
’
button to get current frequency band.
【
9
】
Select BW
：
There are four BW to be selected——3MHz/5MHz/10MHz/20MHz. Choose the
BW you needed
，
and click ‘Set’ button to complete setup. Click the ‘Get’ button to get current BW.
【
10
】
Select Power Level
：
There are three power level to be selected——High/Mid/Low Choose
the power level you needed
，
and click ‘Set’ button to complete setup. Click the ‘Get’ button to get
current power level.
【
11
】
Select baud rate
：
You can select the right baud rate for MK22 Uart1 in this box.
Choose the baud rate you needed
，
and click ‘Set’ button to complete setup. Click the ‘Get’ button
to get current baud rate.
【
12
】
Select hopping mode: There are two mode to be selected——Hopping/Fixed. Choose the
mode you needed
，
and click ‘Set’ button to complete setup. Click the ‘Get’ button to get mode.
When you select Fixed mode, you need to choose a fixed frequency below. The fixed frequency
is related to frequency band and BW.
【
13
】
Select Encryption: You can disable/enable the encryption. When enable this function, you
can set your private password. The password should in the range of 100000~999999. Devices
with different password do not link.
【
14
】
Select Working mode: There are two working mode of MK22——Point to Point mode and
Repeater mode. Choose the working mode you needed
，
and click ‘Set’ button to complete setup.
Click the ‘Get’ button to get current working mode. This function only needs to be set up on the
M51 air unit. The ground unit can synchronize automatically. If you select Repeater mode, you
need to select the air unit whether it is TX or repeater.
How to use Maestro Assistant
1.
Connect MK22 with Maestro Assistant.
Maestro Assistant is a Windows software that configures MK22. Before configuration,
