版本：
V3.0
（
2018.09
）
第
9
页
FAQ (frequently asked question)
Questions
Possible reason
Solution
OLED Output no
signal
●Unturned transmitter
●Check that whether the transmitter is
properly installed and powered on
●Abnormal
decode
of
transmitter, is closing down
●Close input video source, restart transmitter,
until signal of receiver is normal, then turn
on video source again
●Receiver
channel
and
transmitter
channel
are
inconsistent
●Switch receiver channel to transmitter same
channel
Video can not be
recorded or
recorded
properly
●IP address can not match with
transmitter
●Please refer to the usage method to reset IP
address
●Camera can not normally
connect to transmitter
●Check if the wire is loose, if any, using Ping
of transmitter (192.168.1.168) network cable
to test
Receiver
LED
Output
Input
Signal loss
●Transmitter has no source
input
●Please check the signal status of transmitter,
check HDMI interface again, at the
moment, check the camera
●HDMI
connecting
Video
source to transmitter is
disturbed
●Replace HDMI connection between video
source and transmitter to the shielding
line.(recommended original accessories)
●The compatibility problem of
transmitter and video source
●Change another input source
●The receiver does not switch
corresponding program
●Each channel of receiver has two program,
press CH in short time switch corresponding
program
●Abnormal signal of transmitter
●Check that whether transmitter and the
