11
Re-Assembly
Reference the diagrams above for clarification
•
Ensure that every fitting is back in its original location,
tightened fully. (APEX only)
•
Flip the PSU Button back to its ON position “I”
•
Remove the space holder and reseat the top panel to its
original orientation.
•
Replace all 8 screws that were removed for the top panel to
allow it to pivot.
•
Reseat the top grill back onto the chassis by lining up the
pegs with its corresponding clips and push down, all 6 pegs
should click back into position.
•
Set the back panel onto the chassis and replace all 8 screws.
•
Carefully reseat the front panel and hand tighten all 4
thumbscrews to secure the glass back onto the chassis.
•
Reconnect your system and continue enjoying your
MAINGEAR system!
