Cold Frame Assembly Instructions
Step 2. Wall Assembly
Place a thin layer of glue on the edges of a panel. Slide the panel into the groove to make the
corner. Repeat with all sides until your box is complete (see pictures below).
Step 3. Top Cover Assembly
A.) Find a flat area large enough for the lid to be assembled. A table works best so the corners
are exposed to facilitate installing the screws. Lay the four similar sides in a square. Each
corner has 1 predrilled hole. Firmly hold one corner together and install a #8 x 1 5/8" ceramic
coated screw. Repeat until you have three sides put together
Cold Frame Assembly Instructions
Page 3 of 6
MAI NE GARDEN PRODUCT S, I NC
6 7 L A G R A N G E R D P O B O X 2 7 4 H O W L A N D , M E 0 4 4 4 8
T E L . ( 2 0 7 ) 6 1 3
-
2 9 7 3 F A X ( 2 0 7 ) 2 3 6
-
2 0 0 6
Need pic
3 sides of frame
No poly panels
