MAINE ENERGY SYSTEMS PES 20, Operating Manual

Page: 56 / 102

17.1 Chimney
The function chimney is only for chimney droughts and authorized service technicians. It is used for the mea-
surement of exhaust gas.
Note:
The Chimney Sweep function is inactive without the Pelletronic Heating Controller.
The menu item Chimney is situated in the me-
nu General.
Please choose the function Chimney .
• The Furnace temperature is set to 140 °F for a
total runtime of 30 minutes.
• You also can see actual Furnace temperature
and the rest of the time limit.
• After the expiry of the time limit the function
chimney ends.time of expiry the operation
Chimney sweeper ends.
• The button Cancel ends the function Chimney.
17.2 Favorite
Favorite is in the menu General.
With this function you can display most com-
monly used menus in the start menu. This ena-
bles you a direct access.
Select the menu item that should be displayed
as a favorite 1 in the Start menu.
The selected item is green and the icon is dis-
played in the Start menu and is active.
PE 568 USA 2.0
56
Chimney