Courtesy of Main Resource, Inc. Visit us at
www.MainResource.com
or call 800 362-6740 for all your
telecom needs.
Page 14 of 16
Automatic Dialing Numbers may be stored at any programmable button not already assigned by
the system administrator or installer as a line button or other feature, on a secondary level of the
DSS button or using keypad numbers 0-9.
Fill in the identification strips on your phone as you program the numbers.
NOTE: The telephone system allows only one autodial number at a programmable button;
however, you can store an autodial number or feature code at a second level of a location where a
DSS is already stored; just repeat the programming procedure.
Autodial and Speed Dial Numbers -
When storing a feature code as an autodial or speed dial number or an outside number as a feature
code:
1. Press OPTIONS
2. Press NEXT 3 times
3. Press ADIAL or SDIAL (autodial or speed dial)
4. Press the programmable button or keypad button to store
5. Press the line button you wish to dial out on, or press INTERCOM
6. Dial any number up to 16-digits long. Or, if your system has line groups programmed, dial
1-4 for the line group number or dial “0” to have the system choose a line for you. Dial any
number up to 16-digits long.
7. Press SAVE to store and SPEAKER to end.
To program a pause in the number sequence, press HOLD and continue with the number. If you
need to program a hookflash to access a feature, press TAP and continue dialing. To erase digits as
you enter, press BKSP once for each digit to be removed.
When storing a system feature, follow the above instructions, but do not make a line selection
before entering the number. Instead, dial the access code for the feature after you select the
button location.
Storing a DSS Number –
Only one DSS number may be stored at each programmable button location but you may store a
feature code or autodial number on the second level for a button location that already has the DSS
programmed.
To Store an Intercom Extension Number as a DSS Number:
1. Press OPTIONS
2. Press NEXT four times
3. Press DSS
4. Press the programmable button
5. Dial the extension number
6. Repeat as many times as desired.
7. Press SPEAKER to end.
NOTE: Do not program interactive buttons. If this occurs, you can retrieve functions by pressing
INTERCOM “**1” , the interactive button and dial 91, 92 or 93 (from left to right). Attempting to
program these buttons can cause features to be unavailable.
