Page
4
of
5
Once the mailbox mounting brackets are installed, the security cable will be locked. Pull the
mounting arm from the vertical arm to test.
4. INSTALL THE MAILBOX. A small piece of wood (not included) can be used to mount the
mailbox on top of the mounting brackets. Measure the width and length of your mailbox. Cut
the wood to fit and place under the mailbox. The wood should align with the mailbox mounting
brackets. One large or two small pieces of wood may be used. Put the mailbox on top of the post
over the mounting brackets and add screws through the hole in the mounting brackets into the
wood/mailbox. You may also wish to add screws to the side if the mailbox has pre-drilled holes.
