Maier MHI-6800 Manual Download Page 3

This machine uses AC 230V/50Hz(Europe) or 
AC 100~120V/50~60Hz(USA/Japan). Over 
voltage may cause fire hazard or electric shock.  

CAUTION

This instruction booklet describes the safety precautions to be observed
during operation to prevent injuries to yourself ,other persons and damage to the device.
The content not only is suitable for this product but also suitable for
electrical appliances in general.

Ensure that all safety precautions are followed when using electrical 

appliances for the proper operation of the device. 

power

anthorized

personnel

electric shocks and fire hazards.

To prevent fire or electric shock hazard,do not
place the unit in wet places where water may 
enter the device.

Do not use fabrics or other materials to cover this
device. Obstructed air inlets and outlets will 
result in abnormal operation of this device that 
may lead to fire or other accidents.

To prevent interference and distortion, the device 
should be placed at least 1 meter away from the 
computer, television or radio.

For safety reasons and to prevent fire or electric
shock, unplug the power cord from the electric
outlet socket under the following conditions:

When you  do not use the device for a 
long period.
When cleaning, servicing the machine or
during replacement of filter materials.
When you move the device.

casing

To prevent electric shock,do not dismantle,

repair or modify this product freely.

Maintenance and cleaning shall be 

processed as exactly as what instructed 

in this manual.In case of malfunction,please 

contact the authorized maintenance center.

ambient

Fkhhgtgpv"Rctvu

Yjqng"Wpkv"1"Htqpv"Xkgy"

[                                    ] 

[                                    ]

Yjqng"Wpkv"1"Eqpvtqn"Rcpgn

Odor Sensor

CLEAN METAL GRID

REPLACE FILTER

RESET

CLEAN METAL GRID

REPLACE FILTER

RESET

Air Outlet

Air Inlets

Air Inlets

Dust Sensor

Bottom Stand

Summary of Contents for MHI-6800

















Reviews: