INSTRUCTION MANUAL FOR DISHWASHERS
UK
4.7
Automatic cycle start-up
This function lets you start a cycle by simply closing the door without pressing any buttons. To
enable the function, proceed as follows (
Fig.4
):
•
With the machine on and the door open press
START
(
3
) until the signal
A
appears on the display.
•
To disable the function, press
START
(3) again for a few seconds with
the door open.
4.8
Displaying information
•
If you press
SELECT PROGRAMMES
(
2
) for a few seconds you will access the information
menu.
•
Press
SELECT PROGRAMMES
(
2
) repeatedly to view, in sequence:
Tub temperature, boiler temperature, total number of machine cycles, any alarms.
To exit the menu press
SELECT PROGRAMME
(
2
) for a few seconds.
4.9
Turning the dishwasher off
Press
ON/OFF (1)
on the
DISPLAY (4)
to view the dishwasher symbol in stand
by.
4.10
Removal of integral filter
1. Turn off the machine.
2. Place the wash and rinse arms at a right angle to the edge
of the door
(
Fig.7
).
3. Raise each semi-filter, grasping it by the handle.
Page 8 of 14
