Operating Instructions MA 41
8100456_OI_MA41_EN_15a
28
8100456-8 04/15
Figure 13 – New Patient
Enter the characters of the name by scrolling through the alphabet with the
level controls and enter the selected character by using the Stimulus button (2).
Jump to the next or previous field by using the Frequency Up (4) or Down (5)
button. The date can be entered in the same manner with the level controls.
Delete the last character or number by pressing the Delete button (17).
A USB keyboard can also be utilized to enter the patient information. Connect
it to the USB connector (4) and type in the characters. Jump to the next field
with the tab key. Press the functional button OK (6) to save the new patient
and go back to the patient list. The new patient is selected and the current
measurement results can be saved to this new patient by pressing the functional
button Save (9).Press the button No Name (9) to store the results only by a
patient number, without entering a name or use Cancel (6) to go back to the
Patient List without saving.
There is a possibility available to lock the database and to enter a log-in PIN if
the language is set to English. Enter the Patient List and select New Patient by
pressing the New Patient button (15). Select Log-In On by pressing the
functional button Log-In On/Off (15). A screen will appear to set your personal
four digit log-in PIN. Select four numbers between 0 and 9 by the level dial and
enter each by pressing the STIM bar (2) and confirm your personal log-in PIN by
pressing the button Set (9). Remember the PIN very well otherwise it is not
possible to enter the patient list anymore! Each time you enter the patient list
this PIN need to be entered by selecting the digit by the level dial and entering
it by pressing the STIM bar (2).
Enter the New Patient screen and select Log-In Off by button (15) to switch off
the patient list log-in.
