Operation Manual MA 33
8100092 Rev. 9
20
19/08/2019
4.3
MA 33 Software Installation
4.3.1 General
NOTE
: Make sure that the device is not connected with your computer while installing.
In case you already use an older MAICO Database version and want to use it with the
MA 33 Software, the MAICO Database will automatically be updated. It is recommended to
make a backup of the client data prior to initiating the installation process.
Close all open or running programs. Insert the USB flash drive into the USB port. The
InstallShield Wizard will appear. If the InstallShield Wizard does not appear automatically,
double-click
Setup.exe
from the CD. It is possible to stop installation at any time by
pressing
Cancel
.
The User Account Control asks if you want
to allow this app to make changes to your
PC. Press
Yes
to proceed (Figure 3).
The InstallShield Wizard prepares the
setup. Wait to proceed (Figure 4).
Figure 3
Figure 4
Press
Next>
to proceed (Figure 5).
Press
Browse
to
choose
another
Destination Location and/or press
Next>
to
proceed (Figure 6).
Figure 5
Figure 6
