Operation Manual MA 33
8100092 Rev. 9
60
19/08/2019
5.6.3.2 Deleting Values in Speech screen
To completely remove a stored value from the speech table, select the row in the table to
be deleted by clicking in the “condition/word list” cell of that row. The entire row will
highlight blue. Right-click on the mouse on the blue-
highlighted cell “condition/word list.”
A prompt box will appear asking if the value should be deleted. Click yes or no. Selecting
Yes
, will permanently remove the data in the blue-highlighted row. Selecting
No
will
cancel the delete function, but will remain in
Edit Mode
.
5.6.3.3 Changing Stored Values in the Speech Screen
To change a stored value in the speech table, select the row in the table to be changed
by clicking in the “condition/word list” cell of that row. The entire row will highlight blue.
Then edit a response answer in the word list and reselect the appropriate word with left
mouse click, so as to display the changed response (i.e. highlight from green to red, or
from red to green). This amendment will affect a change in the Speech Audiometric Table.
Use the
↑↓cursor keys to change the level of the signal (WRS, MCL, UCL).
Activate the masking button (top right-hand corner of the screen) and use
Page Up/Page
Down
cursor on the keyboard, to change the level of the masker (SRT or WRS).
5.6.4 Settings
– Speech
5.6.4.1 General
The
Settings
option allows different settings to be modified for the following:
View
,
Counter
,
Operation
,
Information
,
Functionality
and
Settings
Figure 86
The setting can be changed by clicking on the different setting options. Click
Ok
to apply
the new setting.