Operating Instruction
ERO•SCAN
®
Screening and Diagnostic Version
operating_instructions_8106556-6_EROSCAN_e_15a
37
8106556-5 02/15
16
Clock and Date/Time Settings
When the ERO•SCAN
®
test instrument is first used, the correct date and time will need to
be set on its internal clock. The date and time are listed on the test printout as day-month-
year (e.g., 07-MAR-14). The clock should be set prior to testing, as changing it after tests
are saved will not change the date on the printout (i.e., whatever date was previously in
memory will be the date on the printout).
Seasonal time changes such as Daylight Saving Time will also require resetting the clock. If
the instrument is being powered on for the first time or if the instrument’s battery is
completely discharged and the battery is not charged within approximately one hour a
“TIME/DATE ERROR” message will occur. If this message appears, reset the time and date.
16.1
Accessing the Clock Menu
To change the time and date press
CHANGE at the main
menu (Display 1, page 19) and then press
SETUP at the
protocol selection Display (Display 2, page 19). The current date
and time presently set in the unit will be shown (Display 13). If
the time and date are correct, press the
UP key to escape
back to the main menu.
NOTE: When a Teal arrow is displayed for a
DOWN arrow,
this represents an alternative menu is available. To access, hold
the
DOWN arrow for 3 seconds until the ‘READY’ light (green
LED) turns off and release the key.
16.2
Changing the Date/Time
If either the date or time is incorrect, press the
CHANGE key
to access the menu to change the month (Display 14). Press the
LEFT or RIGHT
keys to scroll forward or backward through
the months.
You will see the abbreviated name for each month (Display 14).
When the desired month appears on the display, press the
NEXT key to enter the day selection screen. Pressing the
LEFT or RIGHT
keys will scroll through the days of the
month. Repeat this process for the year, hour, and minute using
the
LEFT or RIGHT
arrow keys to make the selection and the
NEXT key to advance to the next display.
When the correct minute is selected, pressing the
DOWN
arrow key (Display 15) will return to the Main Menu. The time
and date changes are automatically saved.
Display 13
Display 14
Display 15
Summary of Contents for ERO SCAN
Page 2: ......