Maico ER shell, Installation Instructions Manual

Page: 21 / 32

7 Housing installation
21
7.6 ER GH wall installation, second room
11.1 Installation socket for second room extrac-
tion DN 75/80
11.2 Adapter
11.3 Internal grille
11.4 G2 filter mat
12 Suction duct, second room connection:
AFR 75/AFR 80 flexible aluminium duct
31 Mounting support UPM 60/100 or ER-
UPM
S Housing segment
Installation video for ER EC second room con-
nection → QR code.
1. Cut out housing segment on the marking using
a knife.
NOTICE The unit will be damaged/function
will be impaired by incorrect air if the installa-
tion socket is inserted incorrectly [11.1].
Degree of protection is no longer guaranteed.
Correctly insert installation socket up to stop.
This must audibly engage.
2. Place installation socket in housing. The edge
of the socket must click into place on the wall
of the housing.
3. Install housing as described above for single
room .
4. Connect suction duct with installation socket
sealed for ventilation.
5. Produce fixing holes for adapter and insert
dowels.
6. Connect adapter to suction duct, e.g. with
cold-shrink tape.
7. Secure adapter to the wall.
8. Insert filter mat and locate the internal grille in
the correct position.
7.7 ER GH ceiling installation, second
room
1. Note installation information: Installation in-
formation [
}
18] .