Mahlkonig X54, Original Instructions Manual

Page: 50 / 60

Home Grinder X54
50
Troubleshooting
Fault Cause / Remedy
The grinder
is not
grinding,
the display
is not lit up.
The power plug is not plugged into a socket.
»
Insert the power plug into a properly
installed socket.
The overcurrent protection switch was
triggered.
»
Check whether the circuit breaker’s
release button (16) has popped out.
Push it back in if necessary.
»
If the button continues to pop out,
contact the customer service for
Mahlkönig products
[see „Maintenance
and service“]
.
The electrical fuse has tripped.
The grinder
does not
grind, the
display
shows error
message
E001
.
The bean hopper has not been inserted.
»
Insert the bean hopper
[see „Inserting the
bean hopper“]
.