Mahlkonig K30 2.0, Instruction Manual, Page: 20 / 40

20
SINGLE ESPRESSO GRINDER
Pausing grinding (stop func Ɵ on)
The stop func on automa cally suspends grinding when you remove the
porta
fi lter from the porta fi lter intake (12) and con nues grinding when you
insert the porta fi lter into the porta fi lter intake again and trigger the start
bu on (11) .
1. Remove the porta fi lter from the porta fi lter intake during grinding to
pause grinding and stop the grinding me. The symbol for the remaining
grinding me
fl ashes.
2. Reinsert the porta fi lter between the porta fi lter intake and the porta fi lter
support (7) before the abort me elapses.
The suspended grinding process is con nued automa cally un l the
grinding me has elapsed.
The abort me is factory-set to 8 seconds and can only be
changed by a service technician.
Changing the type of espresso beans
1. Close the bean container (1) by swiveling in the sliding valve (16)
(see Fig. D ).
2. Grind the remaining espresso beans un l the grinder runs idle
(see chapter “Grinding espresso beans”).
3. Remove the le over espresso beans from the bean container.
4. Pour the new espresso beans into the bean container.
5. Open the bean container by swiveling out the sliding valve.
6. Grind 2-3 shots to remove any residue of the old espresso beans, to
warm up the machine and to avoid any fl uctua ons in the dosage.