Mahlkonig EK43 S, Original Instruction Manual

Page: 12 / 28

12
CommerCial Coffee grinder
Safety
Intended use
The grinder is designed to grind whole roast coffee beans. If necessary, you
can convert the grinder so that it can be used to grind other foods such as
certain types of grain. Contact your dealer for information on this. The grind -
er may only be used to grind the materials for which it has been designed.
In general, make sure that only cleaned, unground material is used. Do not
use the grinder to grind other products or objects.
The grinder is intended for commercial use and may only be serviced by
trained personnel. It may, however, be operated by other persons in a place
where use is supervised.
Any other use is considered contrary to the intended use and may result in
material damage or even personal injury. Do not make any changes to the
grinder. The manufacturer or the supplier shall not be held liable for any
injury or damage resulting from non-compliance with the safety instructions.
Safety information
WARNING!
Danger of electrocution!
Improper use, incorrect electrical installation or a voltage that is too
high can all lead to electrocution.
– Connect the grinder only if the mains voltage of the socket com -
plies with the information indicated on the nameplate.
– Only connect the grinder to a socket with good accessibility,
so that you can disconnect the grinder quickly from the power
supply in the event of any hazardous incident.
– Do not use the grinder if you notice any visible damage or if the
power cable or plug is faulty.
– If the power cable for the grinder is damaged, it must be
replaced by the manufacturer or by qualified personnel in order
to avoid hazards.
– Connect the grinder only to a power supply with a 16 A-slow
back-up fuse.