
73
60 Series 2WD/4WD, Model - 8560
Hy
dr
au
li
c
s
& T
r
an
s
m
issio
n
Hydraulic Suction Filter and Transmission Oil Filter
Change Transmission oil filter (A) initially at 50 hrs. and
subsequently at every 400 hrs. of operation.
Change Hydraulic suction filter (B) initially at 50 hrs. and
subsequently at every 400 hrs. of operation.
These Spin-on type filters are located behind the Battery
box on RH side of tractor.
The battery box is pivot mounted and when unlocked can
be swung outwards as depicted in the illustration.
The filters can be accessed after swinging the Battery box
outwards.
Remove old spin-on filters.
Prime the new spin-on filter with clean oil, and fit them.
Swing the battery box to its normal position after
replacement of filters and lock Bolt (C).
NOTE :
The hydraulic suction filter though
resembles with engine oil filter, it differs in
construction and usage. Hence these are not
interchangeable.
C
Battery Box Closed
A
Battery Box Swung Open
B
Summary of Contents for 60 Series
