16
BA082601-en
Pos: 60 / Technische Dokumentation/Alle Geräte/Überschriften/ Überschriften 1.1/B/ Überschrift 1.1: Bed ienelemente @ 13\mod_ 1237975099177_ 75.docx @ 359008 @ 2 @ 1
5.3
Controls
Pos: 61 / Technische Dokumentation/Hebetechnik/08 Scheren-Hebebühnen/2601 TWIN F III 3.0 / 4.0/BA/Inhalt: 0826 Bedienelemente (Bild) @ 22\mod_ 1295874833033_0.docx @ 964618 @ @ 1
Pos: 62 / Technische Dokumentation/Hebetechnik/08 Scheren-Hebebühnen/2601 TWIN F III 3.0 / 4.0/BA/Inhalt: 0826 Bedienelemente ( Tabelle) @ 22\mod_ 1295875588398_75.d ocx @ 964648 @ @ 1
A Main Switch
B Audible Indicator
C Buttons RAISE/LOWER
D Button CE-STOP
E Key Switch
Pos: 63 / Technische Dokumentation/Hebetechnik/08 Scheren-Hebebühnen/2601 TWIN F III 3.0 / 4.0/BA/Inhalt: 0826 Bedienelemente ( Text) @ 22\mod_ 1295875826646_75.d ocx @ 964676 @ @ 1
•
Use the main switch (A) to switch the lift on and off.
•
When button RAISE or LOWER (C) is pushed, the lift moves until the button is released or the
limit stop is reached.
•
When fully lowering the lift, the support plates stop automatically at a height of 300 mm above
bottom position. Release the LOWER button and push the CE STOP button (D).
The remaining lift travel is accompanied by an audible indicator (B).
•
The key switch (E) is used for manually levelling the support plates. See section "Equalizing the
Support Plates".
Pos: 64 /----- Format-----/MAN UELLER UM BRUCH Seitenumbruch @ 0\m od_1134403577687_ 0.docx @ 1277 @ @ 1
A
D
C
B
E
