14
BA022901-en
3
Test Container Setup
NOTICE
•
Before every commissioning operation, check that
the raising and lowering range of both the container and the lifting roof
the swivel range of the ramps and their drive elements
are free from obstacles.
•
The lifting roof cannot be walked on! Remove snow and dirt from the lifting
roof.
For removal, carry out the steps in these assembly instructions in reverse.
IMPORTANT: In the case of removal, do not charge the unit area towards the
transport vehicle’s driver’s cab!
1 Position the transport vehicle incl. container in the location and secure against
rolling away. Loosen all four container locks.
2 Check the container’s lowering range and remove objects which are
underneath the container.
3 Open the unit area’s tailgate (image
on the right) and perform the follow-
ing work steps:
a. Plug in the cable remote control
(control panel).
b. Establish the power supply via the
unit or a fixed connection.
c. Switch on the main switch (position
1).
d. Have the eight ramp rollers with
safety splint ready in the ramp area.