15
BA315001-en
6.5
Measurement
When a measurement is started, the display shows the measurement values
relevant for official calibrations in the top three lines, with additional information in
the bottom line (the information line). You can use the arrow keys to access the
following in the information line:
•
Lambda, fuel type
•
Soot mass concentration, selected measurement mode
•
Engine speed, oil temperature
•
Unit status
MES: Otto or diesel > Vehicle diagnosis > Gas values/exhaust diagnosis
Display: Confirm
6.6
Measurement Mode a/b (Short Probe) and A/B (Long Probe)
In the case of MES operation, the most suitable measurement mode is set
automatically. For a diagnostic measurement, the mode needs to be selected
manually.
MES: Diesel > Vehicle diagnosis > Exhaust diagnosis, diesel > F7 measurement
mode
Display: Menu > Servicing menu > Mode > Confirm
Once the desired mode has been set, select "Exit" to exit the menu. The most
recently selected mode is active. During measurement, the mode is displayed in
the information line.
Measurement modes A and B for use with a long probe are not available for all
countries.
6.7
Fuel Type (MET 6.1 / 6.3)
The lambda calculation needs to be adjusted to suit the fuel type. The following
fuels can be selected: petrol, LPG (liquid gas) and CNG (natural gas).
Display: Menu > Servicing menu > Fuel type
