23
BA010101-en
7
Dismantling
Decommissioning and dismantling of the equipment may be done only by
specially authorized and trained personnel provided by the manufacturer, licensed
dealers or service partners.
8
Disposal
Pay attention to the product and safety data sheets of the lubricant used. Avoid
damage to the environment. Should a disposal of the device be necessary it must
be done in adherence with locally applicable legal regulations regarding
environmental protection. Remove all materials properly sorted out and bring them
to a suitable waste disposal service. Collect operating materials such as grease,
oils, coolant, solvent-based cleaning fluids etc. in suitable containers and dispose
of in an environmentally protective manner.
Alternatively, you may take the equipment to a specialised waste management
plant to ensure that all components and operating liquids are properly disposed
of.
9
Contents of the Declaration of Conformity
MAHA Maschinenbau Haldenwang GmbH & Co. KG
herewith declares as a manufacturer its sole responsibility to ensure that the
product named hereafter meets the safety and health regulations both in design
and construction required by the EC directives stated below.
This declaration becomes void if any change is made to the product that was not
discussed and approved by named company beforehand.
Type:
PMS / LMS
Name:
Axle clearance tester for cars and lorries; permissible axle load
3,500 / 20,000 kg
Directives:
2006/42/EC; 2014/30/EU
Standards:
EN 12100-1/-2; EN 13850, EN 13857, EN 349; EN 60204-1;
EN 61000-6-3, EN 61000-6-2
10
Annex: Operating Diagrams
See following page(s).
