Maguire Products Vacuum Batch Dryer VBD-150, Installation Operation & Maintenance, Page: 26 / 98

Maguire Products, Inc.
26
VBD

- Vacuum Dryer

TSC
End Preheat, Shutdown, Auto Shutdown, Immediate Shutdown and Pause
End Preheat - (shown only if in a preheat cycle)
Skips the preheat allowing material to immediately pass down to the
Vacuum Chamber (example: material has already been heated and
dryer has been taking offline briefly and powered back on).
At any point during the preheat cycle or standard operation (operation
after initial preheat cycle), pressing the red Shutdown button will bring
up the Shutdown Options screen with the following shutdown options:
Shutdown
–
Shutdown will continue to run the dryer and process the
material in the Vacuum Chamber and the Retention Hopper until they
are empty. Selecting Planned Shutdown will display the Cooldown
option.
Cooldown (ON/OFF)
– When enabled Cooldown will gradually
bring down the temperature of the material in the heating hopper to
the specified temperature (Cooldown Temp) over the specified time
period (Cooldown Time).
To adjust the Cooldown Temperature and Cooldown Time use the
arrow buttons
to adjust the setting. Press ENTER to
advance through the digits and to complete the setting adjustment.
Press the
Shutdown button to shutdown.
Pressing the red power button during a Planned Shutdown will
display the Immediate Shutdown Screen allowing initiation of an
immediate shutdown of the dryer.
Pause
–
Press the Vacuum Chamber will display the Vacuum
Chamber Setup screen. Pause is the red button at the bottom of the
screen. Pauses the vacuum timer indefinitely. To restart after a
pause, press RESUME.
Auto Shutdown
–
Initiates a shutdown (see above) at specified date
and time. For further explanation on how to set the Auto Stop date and
time see page 27.
Immediate Shutdown
–
Fast but controlled shutdown of the heater,
blower, the vacuum system and the purge system.
Cancel - Exits the shutdown prompt screen, doing nothing.