Maguire Products MLS Clear Vu, Installation Operation & Maintenance

Page: 28 / 38

Maguire Products, Inc.
28
MLS Clear Vu

CONTROLLER ARRANGEMENT
Looking at the loading syste
m from the front…
7. Install MAIN controller on left tray.
A. Plug power cord into motor starter box.
B.
Reconnect “VACUUM MOTOR” cord to connector in endplate.
C. Plug in the YELLOW end of the DB9 cable supplied in the kit into the DB9 connector on
the endplate.
D. Reconnect the correct receiver cables to the back of the controller.
8. Install FOLLOWER controller on right try.
A. Plug Power cord into Motor Starter Box.
B. Connect the gray end of DB9 cable to connector in endplate.
C. Connect the new receiver cables to the back of the controller.
IMPORTANT: THE YELLOW END OF THE DB9 CABLE SHOULD ALWAYS BE
PLUGG
ED INTO THE “ MAIN ” CONTROLLER.