Magtrol TORQUE 10, User Manual, Page: 11 / 54

TORQUE 10 SOFTWARE INSTALLATION
www.magtrol.com 3
2. SOFTWARE INSTALLATION
2.1 INSTALLATION PROCEDURE
Plug the USB flash memory or insert the TORQUE 10 DVD-Rom disk into your target
computer’s DVD drive . The installer package can be downloaded from the Magtrol Internet
Site.
https://www.magtrol.com/software-downloads/
Installation listing:
•
TORQUE 10 files
•
LabVIEW ™ Runtime 2020
•
NI-DAQmx Runtime 20.1
•
NI-Serial Runtime 20.0
•
NI-VISA Runtime 20.0
Navigate inside the USB flash drive / DVD-Rom under TORQUE 10 folder.
Then Run install.exe.
Figure 2 Run Setup Windows
Use Explorer to find the intsall.exe file on the disk. Double-click this file to begin the
installation process.
If security is enabled, allow Windows to install this program.
The default installation folders for TORQUE 10 and the required drivers appear in the next
window
CAUTION! YOU MAY CHANGE THESE IF NECESSARY BUT DO NOT
INSTALL TORQUE 10 IN THE WINDOWS PROGRAM FILES (X86)
FOLDER.