Magtrol TM Series, User Manual, Page: 35 / 44

2.7.2 CONNECTING CABLE
The connecting cable to the selected signal processing unit is fitted with a 6-pin connector on the trans-
ducer side and a 14-pin connector on the side of the signal processing unit or pigtail wires for cutomized
connection (
see Fig.2-19 and Fig.2-20
).
2.7.3 CABLE ASSEMBLY ER107 (PIGTAIL WIRES)
Fig.2-19 Cable ER107 - Pin Configuration
The connection cable to the signal processing unit is fitted with a 6-pole axial connector for connection to the
TM Torque Sensor and, on the opposite side, with free ends for connection as required.
The B.I.T.E. test function is only active when the input (brown) is grounded.
2.7.4 CABLE ASSEMBLY ER113 (14-PIN CONNECTOR)
Fig.2-20 Cable ER113 - Pin Configuration
The connection cable to the signal processing unit is equipped with a 6-pole axial connector for connec-
tion to the TM torquemeter and, on the opposite side, a 14-pole connector for connection to the signal
processing unit (MODEL3411, DSP7000,...).
The B.I.T.E. test function is only active when the pin n°12 is grounded.
6 Poles / Axial SOURIAU connector
14 Pin connector
Pigtail wires
ORDERING NUMBER ER 1 _ / 0 _
07 : Pigtail wires
13 : 14-pin connector
a)
1 : Cable length 5 m
2 : Cable length 10 m
3 : Cable length 20 m
a) For use with 3411 Torque Display or DSP7000 Controller
50 mm
ø6.3
White Torque Signal ±5 (±10) VDC
Braun B.I.T.E. (high impedance)
Green Torque Signal GND
Yellow Speed Signal (open collector)
Grey N/C
Pink N/C
Blue
Power Supply GND
Red Power Supply 20-32 VDC
Black Case / Shield
SOURIAU connector / 6 Poles / Straight / Shielded Pigtail wires
Cable length 5m, 10m, 20m
NOTE
50 mm
1
2
3
4
5
6
7
8
9
10
11
12
13
14
ø6.3
SOURIAU connector / 6 Poles / Straight / Shielded Cable Plug / 14-pole
3 Power supply 20-32 VDC
4 Power supply GND
10 Speed signal (open collector)
12 B.I.T.E. (high impedance)
13 Torque Signal GND
14 Torque Signal ±5 (±10) VDC
Case / Shield
Cable length 5m, 10m, 20m
NOTE
27
TM
series
INSTALLATION / CONFIGURATION