2.7 ELECTRICAL CONNECTIONS
.
The connecting cable assembly (ER 113-0X) consists of a cable with 4 shielded twisted
pairs of wires to connect the torque transducer to its signal processing electronic unit. This
assembly must be ordered separately.
Connecting the TM In-Line Torque Transducer is extremely simple. Having installed the drive train, only one
electrical cable needs to be connected for the system to be operational.
2.7.1 GROUNDING
BEFORE CONNECTING THE TM TORQUE TRANSDUCER TO THE SIGNAL PROCESSING UNIT,
THE TRANSDUCER’S HOUSING MUST FIRST BE EARTHGROUNDED
The torque transducer, test bench, driving machine and driven machine must be commonly grounded.
With supported torque transducer installations, the support connects the transducer with the test bench
grounding. On suspended installations, a special wire needs to be drawn from the transducer’s housing to
the common ground (
).
Fig.2-18 Common Grounding.
NOTICE
CAUTION
26
TM
series
INSTALLATION / CONFIGURATION
Summary of Contents for TM 301
Page 4: ...D TM series...
