© 2019 MAGTROL | Due to continual product development, Magtrol reserves the right to modify specifications without forewarning.
Page 4 / 4
Offices in:
Germany
France - China - India
Worldwide Distribution Network
M
AGTROL INC
70 Gardenville Parkway
Buffalo NY 14224 | USA
M
AGTROL SA
Route de Montena 77
1728 Rossens | Switzerland
phone
+1 716 668 5555
fax
+1 716 668 8705
phone
+41 26 407 30 00
fax
+41 26 407 30 01
www.magtrol.com
MANUAL
521
1 CURRENT REGULA
TED POWER SUPPL
Y - US 1
1/2019
5211
To control using an external supply:
1. To remotely control a brake or clutch, connect an external 0-5 VDC source to the
EXTERNAL CONTROL jack on the back panel of the 5211. If using the provided 3.5
mm connector, solder the positive lead of the source to the tip and the negative lead
to the ring.
2. Using the brake cable provided, connect a brake or clutch to the cable as shown in
Fig. 2-1. Use the supplied wire nuts to attach the cable to the brake.
3. Power on the 5211 and adjust the external supply until the desired torque or tension
is obtained.
All manuals and user guides at all-guides.com
