4 - IDevice
MagTek Universal SDK| For MMS Devices | Programmer’s Manual ( Java )
Page 18
ITransaction
OverrideFinalTransacti
onMessage
byte
By default, devices with a display signal the end of a transaction by
returning to the idle page and showing “WELCOME.” This parameter
directs the device to show a message based on the Message ID from the
command
. This option completely overrides the
device’s idle page behavior until the next transaction, power cycle, or
other similar state change.
Usage:
0x00 - reserved, do not use.
0x01 - “AMOUNT”
0x02 - “AMOUNT OK?”
0x03 - “APPROVED”
0x04 - “CALL YOUR BANK”
0x05 - “CANCEL OR ENTER”
0x06 - “CARD ERROR”
0x07 - “DECLINED”
0x08 - “ENTER AMOUNT”
0x09 - reserved, do not use.
0x0A - reserved, do not use.
0x0B - “INSERT CARD”
0x0C – “NOT ACCEPTED”
0x0D - reserved, do not use.
0x0E - “PLEASE WAIT”
0x0F - “PROCESSING ERROR”
0x10 - “REMOVE CARD”
0x11 - “USE CHIP READER”
0x12 - “USE MAGSTRIPE”
0x13 - “TRY AGAIN”
0x14 - “WELCOME”
0x15 - “PRESENT CARD”
0x16 - “PROCESSING”
0x17 - “CARD READ OK - REMOVE CARD”
0x18 - “INSERT OR SWIPE CARD”
0x19 - “PRESENT ONE CARD ONLY”
0x1A - “APPROVED PLEASE SIGN”
0x1B - “AUTHORIZING PLEASE WAIT”
0x1C - “INSERT, SWIPE OR TRY ANOTHER CARD”
0x1D - “PLEASE INSERT CARD”
0x1E - Null prompt (empty screen)
0x1F - reserved, do not use.
0x20 - “SEE PHONE”
0x21 - “PRESENT CARD AGAIN”
0x22 - “INSERT/SWIPE/TRY OTHER CARD”
0x23 - “TAP or SWIPE CARD”
0x24 - “TAP or INSERT CARD”
0x25 - “TAP, INSERT or SWIPE CARD”
0x26 - “TAP CARD”
0x27 - “TIMEOUT”
0x28 - “TRANSACTION TERMINATED”
