oDynamo Development Kit
Quick Installation Guide
MagTek I 1710 Apollo Court I Seal Beach, CA 90740 I Phone: (562) 546-6400 I Technical Support: (888) 624-8350
© Copyright 2019 MagTek, Inc. www.magtek.com
oDynamo Development Kit
Quick Installation Guide
Document Number:
D998200307-C0
Thank you for purchasing
oDynamo Development Kit 21060861
. MagTek has designed this kit to help
you quickly connect oDynamo to a host and activate it so you can begin testing and development.
To set up oDynamo with your test host using the contents of the kit, follow these steps:
1)
From the
MANUALS
, download the latest
product documentation. This includes:
a)
D998200149 oDynamo Installation and Operation Manual
, which provides an overview of
the product and deep detail about integrating it into a solution design.
b)
D998200162 oDynamo Programmer’s Manual (COMMANDS)
, which provides details about
the internal logical workings of the device and about communicating directly (without an SDK)
using operating system native communication libraries and the device’s native commands.
2)
From the
SOFTWARE
, download the latest SDKs that pertain to
your chosen development framework, which may include:
a)
1000004057 oDynamo MTCMS .NET SDK for Windows
b)
1000004942 oDynamo MTCMS C++ / Java SDK for Windows
3)
In the
oDynamo Installation and Operation Manual
, become familiar with the device’s major
components, shown in the section
About oDynamo Components
. The device’s four connectors
and the General Status LED are of particular importance in setting up the development kit.
4)
In the
oDynamo Installation and Operation Manual
, become familiar with the device’s mount and
dismount behaviors, documented in the section
About Pre-Activation, Activation, and
Re-Activation
. After installing the clip-on dismount switch lock included in this kit, it is important
to not remove it without already knowing how to re-activate the device.
5)
Unpack oDynamo, which is sold separately from the kit.
6)
Select the oDynamo connector you will use to communicate with the host (USB, Ethernet, or
RS-232), and connect the appropriate cable(s) as follows, depending on connection type:
Power Only Cable 1000003906 (LEFT), RS-232 / Power Cable 1000004111 (RIGHT)
a)
To use the
RS-232 and Power Port [J1]
to communicate with the host using RS-232:
