Magtek MICR Plus Technical Reference Manual Download | Manualshive

Page: 61 / 70

background image

53

APPENDIX D. RS-232 AUXILIARY PORT

In addition to the RS-232 Host port, the MICR Plus offers the added benefit of an RS-232
auxiliary port. This port allows the user to attach an additional RS-232 device to the Host
through the MICR Plus. For example, Figure D-1 shows Mag-Tek’s IntelliPIN device attached
the RS-232 auxiliary port.

25-pin, 6' Cable to PC
Part No. 22617504

10' Cable to IntelliPIN

Part No. 30019308

120 VAC
Power Adaptor
with 6' Cable
P/N 64300050

MICR Plus

IntelliPIN

Dock

Figure D-1. IntelliPIN on Auxiliary RS-232 Port

In this setup, the MICR Plus serves as a communication bridge between the Host and the RS-232
device, directing the data flow between the Host and the RS-232 device. It should be noted that
at all times, the Host is responsible for the control and operation of the RS-232 device.

COMMUNICATION PARAMETERS

The RS-232 auxiliary port is set to the same communication parameters used by the RS-232 Host
port.

HOST DATA TO AUXILIARY PORT

The MICR Plus will not automatically direct Host data to the auxiliary port. There are two
methods available to direct data to the auxiliary port.

The first method involves bracketing the data with <STX> and <ETX> as follows:

<STX>[Host data]<ETX

>

The MICR Plus will automatically remove <STX> and <ETX> from the message, and will
transmit the Host data through the auxiliary port.

«
...
59
60
61
62
63
...
»

Summary of Contents for MICR Plus







































































Reviews:

No comments

Related manuals for MICR Plus

Brand: EarthWay Pages: 3

Brand: Magtek Pages: 55

Brand: Moneris Pages: 25

Brand: NCR Pages: 8

Webster's Spelling Corrector NC-10

Brand: Franklin Pages: 8

Brand: RIOTEC Pages: 6

Brand: Advantech Pages: 30

Brand: Tolino Pages: 79

Brand: Contex Pages: 258

Brand: Planet Audio Pages: 8

Brand: Akai Pages: 31

Brand: Magnadyne Pages: 12

Brand: Titan Electronics Pages: 22

Brand: Farenheit Pages: 20

Brand: Silvercrest Pages: 58

Brand: Honeywell Pages: 44

Brand: VDO Pages: 2

Brand: Panasonic Pages: 5

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands