2 - Installation
iDynamo 5 and iDynamo 5 (Gen II)| Secure Card Reader Authenticator | Installation and Operation Manual
Page 17 of 33 (
D99875473-120
)
7)
Install and configure the host software you intend to use with iDynamo. If you do not yet have host
software, you can download a test tool from the App Store called
MagTek Test
, published by
MagTek, Inc.
, to perform simple tests.
8)
Make sure the host software is configured to look for the device on the proper connection type.
9)
Make sure the host software is configured to look for the correct device.
10)
Make sure the host software is configured to properly interpret incoming data from the device.
11)
Use the host software or the
MagTek Test
app to test swiping, inserting, and tapping a card. For
details, see section
. If you are using the
MagTek Test
app, follow these steps:
a)
At the bottom of the app, select
Lightning
.
b)
Press the
Connect
button. If the host successfully connects, the main reporting area of the app
will say
Connected…
.
