5 - Removal and Re-installation
ExpressCard 2000 / ExpressCard 3000| Instant Issuance Card Personalization System | Hardware Service Manual
Page 77 of 356 (
D99875607-91
)
5.3
How to Remove / Re-install the Cover
Approximate time to remove: 30 minutes plus any sub-procedures
Approximate time to re-install: 45 minutes plus any sub-procedures
Video Link:
ExpressCard 2000 Replacing Top & Front Covers
Figure 5-1 – Cover (REAR LEFT VIEW, REAR RIGHT VIEW)
Some of the modules inside the ExpressCard you are servicing may look different from
the photos in this procedure. However, the steps of the procedure are the same, and are
unrelated to / unaffected by the appearance of the modules.
ExpressCard has a cover which secures the device’s contents and provides mount points for the top access
door and touchscreen, and incorporates the card output bin and manual feed slot. Some service
procedures require removing the device’s cover to give unobstructed access to certain components.
