Magtek DYNAPRO, Programmer'S Manual

Page: 26 / 38

3 - MagneFlex Powder Resources
SDK - MagneFlex Powder, MIddleware,| PIN PEDs | Programmer’s Manual (MagneFlex API)
Page 26
Parameter Description
DeviceID URI of the device.
For USB devices, Use an empty string to open the first
device found. Otherwise use:
USB://DEVICESERIALNUMBER
Example,
USB://99261829170E0810
For Ethernet devices, use the form:
IP://IPAddress:PORT
Example,
IP://10.57.10.180:26
For 802.11 Wireless devices, use in the form:
TLS12://TLSDEVICESERIALNUMBER
TLS12TRUST://TLSDEVICESERIALNUMBER
Example,
TLS12://TLS99261829170E0810
TLS12TRUST://TLS99261829170E0810
For BLE devices, use the form:
BLEEMV://DEVICENAME
Example,
BLEEMV://DPG123456789A
DEVICENAME is listed in the operating system Bluetooth
settings.
WaitTime Time in seconds the device will wait for the action to be
completed.
(1 - 255)
WaitTimeBeforeTransactionComplete Time in seconds to wait after receiving the transaction
response before the transaction is complete.
IssuerAuthenticationData Issuer response to the transaction request in hexadecimal
format. This field is for the data portion of the EVM Tag 91.
IssuerScriptTemplate1 Issuer Script to send to ICC in hexadecimal format. This
field is for the data portion of the EVM Tag 71.
IssuerScriptTemplate2 Issuer Script to send to ICC in hexadecimal format. This
field is for the data portion of the EVM Tag 72.
ApprovalStatus Status from acquirer/issuer. This field represents the data
portion of the EMV Tag 8A.
Example:
0
– Approve
1
– Decline
KSN Key serial number used for the transaction
DeviceSerialNumber Device serial number
AdditionalRequestData Additional key/value pairs of data