Compliance
FCC WARNING STATEMENT: This equipment has been tested and was found to comply with the
limits for a Class B digital device pursuant to Part 15 of FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is operated in a
residential environment. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual, may cause harmful
interference with radio communications. However, there is no guarantee that interference will not
occur in a particular installation.
FCC COMPLIANCE STATEMENT: This device complies with Part 15 of the FCC Rules. Operation
of this device is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
CANADIAN DOC STATEMENT: This digital apparatus does not exceed the Class B limits for radio
noise from digital apparatus set out in the Radio Interference Regulations of the Canadian
Department of Communications.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites
applicables aux appareils numériques de la classe B prescrites dans le Réglement sur le brouillage
radioélectrique édicté par le ministère des Communications du Canada.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numériqué de la classe B est conformé à la norme NMB-003 du Canada.
CE STANDARDS: Testing for compliance with CE requirements was performed by an independent
laboratory.
The unit under test was found compliant with standards established for Class B devices.
UL/CSA: This product is recognized per Underwriter Laboratories and Canadian Underwriter
Laboratories 1950.
RoHS STATEMENT: When ordered as RoHS compliant, this product meets the Electrical and
Electronic Equipment (EEE) Reduction of Hazardous Substances (RoHS) European Directive
2002/95/EC. The marking is clearly recognizable, either as written words like “Pb-free”, “lead-free”,
or as another clear symbol ( ).
LED
Power LED (Blue); Three-color General Status LED (Red/Green/Amber)
COLOR
FLASHING PATTERN
MEANING
OFF
OFF
If connected to USB, device is powered off,
or the host has put the device into suspend
mode, or a card has just been swiped.
If powered by batteries, the device is
waiting for a swipe, or device is powered
off, or batteries need to be replaced.
GREEN
GREEN-
GreeGREEN
OFF
STEADY ON
If configured to require authentication, device
is waiting for authentication. After authenti-
cation is established it will slowly blink green,
or will turn steady red if authentication fails.
Otherwise, device is ready to read a card.
GREEN
TWO SECONDS ON
Device has successfully read a swiped card.
GREEN
SLOW BLINKING
If configured to require authentication, authentication
has been established, device is ready to read a card.
GREEN
RAPID FLASHING
If operating in wireless mode, reader has card
data to send to the host, but does not yet have a
wireless data connection to the host. Flashing
will stop when connection is established or after
timeout waiting for connection (15-30 seconds).
AMBER
STEADY ON
Device is powered by USB and is waiting for
the host to establish a USB data connection.
AMBER
TWO SECONDS ON
If operating in wireless mode, reader has card
data to send to the host, but sending has failed.
RED
STEADY ON
If configured to require authentication, authen
-
tication has failed. Attempt to re-authenticate,
or power off the device, check authentication
configuration, and power the device back on.
Commands
The custom software wraps commands in simple Get/Set wrappers, and
should use whatever BLE library is appropriate for the chosen software
development framework.
Accepting Payments
Make checkout faster with a reliable swipe path. Unlike other mobile
devices, the DynaMAX has a long read path with well-defined head pressure,
and well controlled slot width for maximal first swipe read rate. Your
customers will appreciate the faster checkout and will be reassured by one
swipe completing their transaction.
Please note that the use of this accessory with an Apple product may affect wireless performance. Apple®, Apple Pay®, OS X®, iPhone®, iPad®, iPad Air®, iPad Pro®, Lightning®, and Mac® are trademarks of Apple Inc., registered in the U.S. and other countries.
EMV® is a registered trademark in the U.S. and other countries and an unregistered trademark elsewhere. The EMV trademark is owned by EMVCo, LLC. The Contactless Indicator mark, consisting of four graduating arcs, is a trademark owned by and used with
permission of EMVCo, LLC.
MAGTEK: Registered to ISO 9001:2015 © Copyright 2022 MagTek, Inc. PN D998200048 v50 10/22
MagTek
®
Inc., 1710 Apollo Court, Seal Beach CA 90740 | p 562-546-6400 | support 562-415-6800 | f 562-546-6301 | www.magtek.com
Use and Compliance
Pb
