7 - How to use Configurations
DynaFlex, DynaProx| Utility Software | User Manual (Windows)
Page 34 of 35 (
D998200402-30
)
7.11
Display Message on Device (LCD Device Only)
To display pre-programmed message on the device, follow these steps.
1)
Select
Settings
tab, then select the
Message ID
that you want to display on the device LCD screen,
enter the amount of time in seconds you want to display, then press
Display Message
button.
2)
See the message on the LCD screen and observe the status in the bottom of the software.
