2 - How to Connect to Devices
DynaFlex, DynaProx| Utility BCR | Manual ( Windows )
Page 10 of 16 (
D100005916-10
)
2
How to Connect to Devices
To connect via an interface listed in the
Device
list box, follow these steps.
2.1
How to Connect Using the USB Connection
1)
For best results, use the cable that is included with the device.
2)
Connect the USB-C end of the cable to DynaFlex or DynaProx device.
Figure 2-1 - Connecting DynaFlex / DynaProx to a USB Host
3)
If you plan to route the cable out the back of the device, route the cable through the cable
management clip to change its direction. Even if you are not routing out the back, you may use the
cable clip for strain relief to help stabilize the mechanical connection when cardholders or operators
move the device or the cable.
4)
Route the cable in the desired direction (e.g., out the back, left, right, or down into the countertop).
5)
Connect the other end of the USB cable to the host’s USB port.
6)
As soon as the device starts receiving power through USB, it automatically powers on.
