6 - Operation
DynaFlex II| Product Family | Installation and Operation Manual
Page 32 of 78 (D998200554-10)
Table 6-2 – DynaFlex II LED Colors
Color
Means
Red
Stop or stopped
Example: LED1 is red.
Stop
using device: Battery is
about to run out of charge.
Yellow
Wait or waiting
LED2 will show status for Access Point connection:
Green connected, yellow waiting for connection.
Green
Go, going, or went
LED3 will show status for WebSocket connection:
Green connected, yellow Waiting for connection.
Other Colors
Reserved
Table 6-3 – DynaFlex II LED Patterns
Color
Means
Solid
Solid
LEDs generally require an operator or cardholder to take action to change
the state the LED is reporting.
Example: Host is connected. Cardholder or host would have to disconnect.
Example: Host is disconnected. Host would have to initiate connection.
Blinking
Blinking
LEDs generally mean the device is in the process of doing / attempting
something. Blink duty cycle and blink period are generally selected to show
urgency or ongoing progress through a series of steps.
Example: Device is attempting to connect to the WLAN access point.
