BulleT MagneSafe Swipe Reader
4
SPECIFICATIONS
Table 1-1 lists the specifications for the BulleT MagneSafe Reader. Figure 1-2 shows the
dimensions of the Reader.
Table 1-1. Specifications
Reference Standards
ISO 7810 and ISO 7811; AAMVA*
Power Input
USB port or 5 VDC for battery charging
Recording Method
Two-frequency coherent phase (F2F)
Message Format
ASCII
Card Speed
4 to 60 ips (10.1 to 152.4 cm/s)
Battery Characteristics
3.7V, 120 mAh Li-ion Polymer Battery
Time to Charge Battery
About 2.5 hours (from a fully discharged state)
Card Swipes per Full Charge
Over 100 swipes
ELECTRICAL
Current
100mA maximum during charge
MECHANICAL
Dimensions
Length 2.68” (68.07mm)
Width
0.65” (16.51mm)
Height 1.35” (34.29mm)
Weight
1.4 oz. (39.7 gr)
Cable length
6’
Connector
USB Micro B
ENVIRONMENTAL
Temperature
Operating
32
°
F to 113
°
F (0 °C to 45
°
C)
Storage
-4
°
F to 140
°
F (-20
°
C to 60
°
C)
Humidity
Operating
10% to 90% noncondensing
Storage
10% to 90% noncondensing
* ISO (International Standards Organization) and AAMVA (American Association of Motor
Vehicle Administrators).
Figure 1-2. Dimensions for BulleT
