Magom CAT D11 Manual Download Page 7 | Manualshive

Page: 7 / 20

Magom CAT D11 Manual Download Page 7

7

CAT D11 - HYDRAULICS

www.magomhrc.com

2005-XXX

DETAILS

1/16 Hydraulic kit for D11 Bruder Model

CONTENTS

Hydraulic cylinders, Hydraulic pump, Hose, Hydraulic valve,

Hydraulic oil and Y connectors (8)

Please note that this product is not a toy and not suitable for youngters under the age of 16. Technical details may be

subject to changes and modifications. All images and designs are property of MAGOM HRC. For any doubts or

questions, please contact us throught www.magomhrc.com.

CONNECTING DIAGRAM

Connect the hose as shown in the picture. Use our recommended oil.

If you have any doubts about the assembling process, please contact us to: [email protected]

Rear

Front

Blade up/down

Blade angle

Ripper up/down

Ripper angle

It is recommended

using a spring to

prevent hose

expansion.

CAUTION !

This product

IS

NOT A TOY. NOT SUITABLE FOR PEOPLE UNDER 16.

This is a hobby product and some experience is required.

If you have any doubts or questions, please contact with our team: [email protected]

PLEASE READ THIS BEFORE START

«
...
5
6
7
8
9
...
»

Summary of Contents for CAT D11





















Reviews:

No comments