3.0
Using Your Bike
3.1
Riding your bike
Before riding, make sure that you activate
the battery by switching the key to the ON
position.
The LED lights located on top of the battery
indicate its current charge level.
Turn on the display unit that is on the
handlebars (see 1.3).
Select your desired level of assistance and begin to pedal.
You’ll find that the motor will engage as soon as you start pedaling.
WARNING: Turning the pedals one half of a rotation will immediately engage the motor. Beware
not to turn the pedals while the unit is powered on when not riding.
When you use the brakes, the electronic brake sensor located on the brake levers will
immediately cut the power to the motor for added safety.
The left brake lever controls the front brake while the right brake lever controls the rear
brake.
You can also use your bike without any electric assistance by turning off the battery
(switching the key to OFF) or by adjusting the assistance level on your LCD display
to 0. The motor will then feature zero resistance and you’ll be freewheeling. Select the
appropriate mechanical gear by activating the 7 speed gear lever located on the right
hand side of the handlebar.
3.2
Adjusting the height of the seat and handlebar
The height of your seat can be adjusted:
Release or open the lever, adjust the seat height to the desired
position
without ever exceeding the mark carved onto the
seat’s tube
then close the lever returning it tightly to the locked
position. The seat’s height should be set so that your legs can be
extended comfortably when the corresponding pedal is in the
lowest position.
