![Magnum MSC 2101 Operating & Parts Manual Download Page 4](http://html.mh-extra.com/html/magnum/msc-2101/msc-2101_operating-and-parts-manual_694483004.webp)
4
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
This manual contains DANGERS, WARNINGS, CAUTIONS, NOTICES and NOTES which must be
followed to prevent the possibility of improper service, damage to the equipment, personal injury or death.
The following formatting options will apply when calling the readers attention to the DANGERS, WARN-
INGS, CAUTIONS, NOTICES and NOTES.
DANGER
INDICATES A HAZARDOUS SITUATION WHICH, IF NOT AVOIDED,
WILL RESULT IN DEATH OR SERIOUS INJURY.
WARNING
Indicates a hazardous situation which, if not avoided, could result
in death or serious injury.
CAUTION
Indicates a hazardous situation which, if not avoided, may result in minor
or moderate injury.
NOTICE
Indicates a hazardous situation which, if not avoided, may result in
property or equipment damage.
Note:
Notes contain additional information important to a procedure and will be found within the regular
text body of this manual.
SAFETY NOTES
OPERATING SAFETY
Before using the pump be sure to read and understand all of the instructions! This equipment was designed
for specific applications; DO NOT modify or use this equipment for any application other than which it was
designed for. Equipment operated improperly or by untrained personnel can be dangerous! Read the
operating instructions and familiarize yourself with the location and proper use of all instruments and
controls. Inexperienced operators should receive instruction from someone familiar with the equipment
before being allowed to operate the pump. The following points should be practiced at all times:
•
NEVER
start a unit in need of repair.
•
NEVER
operate the pump if any of the following conditions exist during operation:
1. Sparking occurs.
2. Combustible surface is present.
3. Protective covers are loose or missing.
WARNING
Never pump volatile or corrosive chemicals or solutions with this pump.
These fluids could create serious health and environmental hazards. High
pressure increases the chance of pump explosion which may result in
serious personal injury.
Summary of Contents for MSC 2101
