manualshive.com logo in svg

Magnum MS2000, Owner'S Manual

Share
Download
Magnum MS2000 Owner'S Manual Download Page 2

© 2016 Sensata Technologies

Page i

Disclaimer of Liability

The use of this manual and the conditions or methods of installation, operation, use, and 

maintenance of the MS Series inverter/charger is beyond the control of Sensata Technologies. 

Therefore, this company does not assume responsibility and expressly disclaims liability for loss, 

damage, or expense whether direct, indirect, consequential or incidental that may arise out of or 

be any way connected with such installation, operation, use, or maintenance.
Due to continuous improvements and product updates, the images shown in this manual may not 

exactly match the unit purchased.

Restrictions on Use

The MS Series inverter/charger may only be used in life support devices and systems with the 

express written approval of Sensata Technologies. Failure of this inverter can reasonably be 

expected to cause failure of that life support device or system, or to affect the safety or effectiveness 

of that device or system. If the MS Series inverter fails, it is reasonable to assume the health of 

the user or other persons may be endangered.

Copyright Notice

Copyright © 2016 by Sensata Technologies. All rights reserved. Permission to copy, distribute, 

and/or modify this document is prohibited without express written permission from Sensata.

Document Information

Description – MS Series Owner’s Manual

Part Number and Revision – 64-0007 Rev F

Date Published – July 2016
This entire manual is available for download—with many of the diagrams available in color—under 

the Documents menu on our website at: 

www.SensataPower.com

.

Contact Information

For Magnum Energy products:

Sensata 

Technologies   Phone: 

425-353-8833

2211 West Casino Rd. 

 

 

Fax: 425-353-8390

Everett, 

WA 

98204 

   Web: 

www.SensataPower.com

Statement of Appreciation

Thank you from all of us at Sensata Technologies for purchasing this MS Series inverter/charger.
We understand that you have many purchasing options in the marketplace, and we are pleased that 

you have decided on this Magnum Energy product. This MS Series inverter/charger was proudly 

assembled and tested in the United States at our facility in Everett, Washington.
At Sensata, we are committed to providing you with quality products and services, and hope that 

your experience with us is pleasant and professional.

Record unit’s model & serial number in case you need to provide this information in the future. 

Model:

Serial Number:

MS2000 (–15B/–20B)

T1

MS2012 (–15B/–20B)

J1

MS2812

H1

MS2024

AJ

MS4024

K1

MS4048 (–20B)

AT

Summary of Contents for MS2000



















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands