Magnum MLT4060KV, Operating Manual, Page: 25 / 40

25
BASIC MAINTENANCE SCHEDULE - MITSUBISHI ENGINE
Refer to the original equipment manufacturer’s operating manual for a complete list of
maintenance requirements. Failure to comply with the procedures as described in the engine
operator’s manual will nullify the warranty, decrease performance and cause equipment
damage or premature equipment failure. Mainenance records may be required to complete
a warranty request.
Use the schedule in the following table as a guide for regular maintenance intervals. For additional or replacement
copies of the engine operator’s manual, contact an authorized dealer in your area.
* Perform after the initial 50 hours of operation, then on the regularly scheduled interval indicated in the schedule
above.
** Certain conditions may require the fuel tank to be drained and cleaned more often. When operating in extremely
dusty conditions, clean the fuel tank as often as necessary.
Item Daily
50
Hours
250
Hours
400
Hours
500
Hours
1000
Hours
As
Required
Check Oil Level 
Check Coolant Level 
Check Fuel Level 
Check Tire Pressure 
Check All Electrical Connections 
Inspect Radiator Fins For Debris, Clean As
Required

Inspect Light Tower Winch For Proper Operation 
Fuel Tank - Drain Water 
Check Air Cleaner 
Replace Engine Oil And Oil Filter  *
Belt And Belt Tension - Inspect And Adjust 
Replace Fuel Filter 
Drain And Clean Fuel Tank  **
Check Glow Plugs 
Lubricate Leveling Jacks 
Bolts And Nuts On The Engine - Retighten  *
Replace Heated Fuel Filter (If Equipped) 
Inspect Engine Starting Battery 
Air Cleaner Element - Clean, Check And Replace 
Fuel System - Bleed Air 
Water Sedimenter - Drain Water 