background image

- 3 - 

A Message From the President 

 
 
 
Thank you for choosing the Magnum Dynalab 

MD 308

 Integrated Amplifier. Great 

care has been given in the design, manufacturing and selection of components for 
the 

MD 308 

Integrated Amplifier. This complete process insures optimum listening 

enjoyment for many years.  
 
Simplicity of the circuit using high grade components insures that accuracy and 
realism of the music is the end result.  The power supply with its specially designed 
transformer is at the heart of the stability and dynamics that the 

MD 308

 exhibits.  

 
When using these high grade components a considerable length of time is required 
for the 

MD 308

 to reach its full potential, either a high quality break in disc or white 

noise from a FM tuner will insure optimum performance.   
 
Once again thank you for including a MAGNUM DYNALAB product in your 
entertainment system, we are sure that you will have years of listening pleasure 
from your 

MD 308

. If there is anything else we can do, please call us on our toll 

free number, 1-800-551-4130 or contact us via email at: 

[email protected]

.  

 
 
 
Respectfully yours,  
Larry Zurowski 
 
 
 
 
President 

 

Summary of Contents for MD 308













Reviews: